-
Item# MUX-500752-RX
The Muxlab HDMI over IP extender allows HDMI equipment to be connected up to 330feet (100m) @ 1080p via one (1) Cat5e/6 unshielded twisted pair cable in a point-to-point configuration. Point-to-multipoint and multipoint-to-multipoint is possible by connecting several Transmitters and Receivers to the same Ethernet network. The Transmitter (500752-TX) and Receiver (500752-RX) also support PoE (PD) if used with a PoE (PSE) Ethernet Switch. The HDMI over IP extender kit comes with one (1) Transmitter...
-
Item# MUX-500734-SM10
The 6G-SDI Extender over Fiber Optic with Return Channel is a unique solution from MuxLab for extending SDI cameras or other SDI sources in up to 4K resolutions to a distance of up to 400m (1300ft) using OM4 multi-mode fiber (model 500734), 10km (33,000ft) using single-mode fiber (model 500734-SM10), 40km (132,000ft) using single-mode fiber (model 500734-SM40), and 80km (264,000ft) using single-mode fiber (model 500734-SM80).
The product supports multichannel transmission, and can simultaneously...
-
Item# MUX-500427
The HDMI 1x8 Splitter, 4K60 (500427) allows one (1) HDMI 2.0 source to be distributed to up to eight (8) HDMI displays. The splitter supports up to 4K (3840 X 2160) video @ 60Hz, HDR, Deep Color and HD audio. The splitter is HDCP 1.4 & 2.2 compliant and features LED diagnostics. Additionally, all connectors are on the rear panel for neater cabling. Features: Distribute one HDMI 2.0 source to eight displays
Supports up to 4K @ 60Hz (4:4:4)
HDCP 1.4 and 2.2 compliant
Supports HDR and Deep Color
Supports...
-
Item# MUX-500702
The LongReach HD-SDI Extender Kit (model 500702) features LED diagnostics for sync, signal detect and supports transmission of up to 2.97/3.0 Gbps uncompressed, un-encrypted digital video within television facilities and between professional video equipment. Up to 500 ft.
Features: Supports SDI-SMPTE 259M-C (270Mbps) HD-SDI-SMPTE 292M (1.485, 1.485/1.001 Gbps) HD-SDI-SMPTE 424M/425M (2.97/3.0 Gbps)
Up to 500 ft via Cat5e/6 at all resolutions
LED diagnostics; sync, signal detect
Cast aluminium...
-
Item# MUX-500705
The Muxlab 500705 is an SDI to USB 3.0 Video Capture & Streamer (500705) allows the user to record from SDI video sources to a PC over USB 3.0. The unit supports an SDI In port for the source and SDI Loop Out for a monitor. The 500705 is capable of connecting to a 3G/HD/SD-SDI (1080p @ 60Hz) source and will stream at up to 1080p/60 over the USB 3.0 port to a PC or similar device to record and/or send the video to a broadcasting service such as YouTube, Facebook, and other broadcasting services....
-
Item# MUX-500812
The MuxLab ProDigital Network Controller (500812) is a Linuxbased PC that allows users to control hub-installed MuxLab products via an Ethernet Web interface.
When installed on a local area network (LAN), the MuxLab Network Controller will scan the LAN for connected MuxLab AV over IP products allowing the user to auto-discover, configure and control the connectivity of these products through an Ethernet Web interface. The Controller may also be managed by MuxLab's MuxControl App and the...
-
Item# MUX-500970-SM10
MuxLab 500970-SM10 is a Singlemode 10km SFP module, 1310nm (6 Miles).
Specifications: Weight: 0.15 lbs (0.070 kg)
Dimensions: 0.35 H x 0.5 W x 0.72 L in (1.82 x 1.28 x 0.89 cm)
-
Item# MUX-500718
The 12G-SDI 1x6 Splitter, 4K/60 (500718) allows one 12G/6G/3G/HD/SD-SDI source to be distributed and amplified to up to six 12G/6G/3G/HD/SD-SDI displays. The splitter supports up to 4K (3840 X 2160) video and HD audio, including 480i (SD-SDI), 720p/1080i (HDSDI), 1080p (3G-SDI), 4K/30 (6G-SDI) and 4K/60 (12G-SDI). The device automatically detects the 12G/6G/3G/HD/SD-SDI signal and re-clocks and regenerates the signal at the output for extending distances between source and displays. Additionally,...
-
Item# MUX-500701-2PK
2 Quantities AvailableThe HD-SDI Balun (500701) allows one HD-SDI signal to be transmitted up to 150 ft (45m) via Cat5e cable at HD resolution in a point-to-point configuration. The HD-SDI Balun supports transmission of up to 2.97/3.0 Gbps uncompressed, un-encrypted digital video (optionally including embedded Audio and/or Time Code) within television facilities and between professional video equipment.
Features: Supports SD, HD and 3G resolutions
Up to 150 ft (45m) via Cat5e cable @ HD
Up to 400 ft (120m) via...
Read More
-
Item# MUX-500752-TX
The Muxlab HDMI over IP extender allows HDMI equipment to be connected up to 330feet (100m) @ 1080p via one (1) Cat5e/6 unshielded twisted pair cable in a point-to-point configuration. Point-to-multipoint and multipoint-to-multipoint is possible by connecting several Transmitters and Receivers to the same Ethernet network. The Transmitter (500752-TX) and Receiver (500752-RX) also support PoE (PD) if used with a PoE (PSE) Ethernet Switch. The HDMI over IP extender kit comes with one (1) Transmitter...
-
Item# MUX-500715
The MuxLab 500715 - 3G-SDI to HDMI Extender Kit converts 3G-SDI to HDMI and then transmits it up to 330 ft / 100m via single Cat5e/6 cable at all resolutions in a point-to-point configuration. The 3G-SDI to HDMI Extender Kit supports transmission of up to 2.97/3.0 Gbps uncompressed, un-encrypted digital video (optionally including embedded Audio and/or Time Code) within television facilities and between professional video equipment. Features: Up to 330ft / 100m via Cat5e cable
Up to 400ft / 122m...
-
Item# MUX-500769-RM
The MuxLab 500769-RM HDMI 2.0 Digital Signage Media Player is capable of receiving multiple H.264/H.265 AV content simultaneously up to 4K/60 (4:4:4) from a local network, the Internet, internal memory or external USB memory devices, and supports multiview capability and scheduling to automatically deliver this customized windowed AV content based on a weekly schedule. Multiple video, audio and image file formats are supported. It is able to up-scale
[email protected] video to
[email protected] (4:4:4) and...
-
Item# MUX-500306-2PK
The Shielded CATV Balun allows RG6 coaxial cable to be replaced by Cat 5e/6/7 STP or UTP cable in the terrestrial RF environment. Used in pairs, the Shielded CATV Balun allows broadband CATV equipment to be integrated into a structured cabling system thereby allowing CATV equipment to be moved or added to any convenient modular wall outlet. When used with shielded twisted pair cable, the connection supports greater RF ampliflication and therefore greater distance with less EMI/RFI egress versus...
-
Item# MUX-500756-RX
The Muxlab Inc. 500756-RX 3G-SDI /RS232 over IP with PoE allows easy extension and distribution of broadcast quality SDI, HD-SDI or 3G-SDI video with embedded audio over local area networks (LAN).
This low-latency and versatile solution consists of individual transmitter and receiver units which can be configured in a variety of combinations. It is a cost-effective alternative to a dedicated SDI matrix switch. The 3G-SDI over IP extender allows users to send any SDI signals over CAT5/6 cable...
-
Item# MUX-500756-TX
The Muxlab 500756-TX 3G-SDI /RS232 over IP with PoE allows easy extension and distribution of broadcast quality SDI, HD-SDI or 3G-SDI video with embedded audio over local area networks (LAN).
This low-latency and versatile solution consists of individual transmitter and receiver units which can be configured in a variety of combinations. It is a cost effective alternative to a dedicated SDI matrix switch. The 3G-SDI over IP extender allows users to send any SDI signals over CAT5/6 cable...
-
Item# MUX-500727
2 Splitters AvailableThe Muxlab 12G-SDI 1x4 Splitter, 4K/60 (500727) allows one (1) 12G/6G/3G/HD/SD-SDI source to be distributed and amplified to up to four (4) 12G/6G/3G/HD/SD-SDI displays. The splitter supports up to 4K (3840 X 2160) video and HD audio, including 480i (SD-SDI), 720p/1080i (HD-SDI), 1080p (3G-SDI), 4K/30 (6G-SDI) and 4K/60 (12G-SDI). The device automatically detects the 12G/6G/3G/HD/SD-SDI signal and re-clocks and regenerates the signal at the output for extending distances between source and...
Read More
-
Item# MUX-500302
The VideoEase CATV Balun II (500302) allows traditional 75-ohm coaxial cable to be replaced by a single pair of Cat 5 UTP cable in the CATV, VHF and FM environments in certain applications. Used in pairs, the CATV Balun II allows broadband CATV equipment to be integrated into structured cabling systems thereby allowing CATV equipment to be moved or added to any convenient modular wall outlet.
The CATV Balun II provides a versatile cabling solution for broadband video systems used by schools,...
-
Item# MUX-500439
The MuxLab 500439 HDMI Audio Extractor with Dolby & DTS Downmixer unit extracts digital audio from a video source up to HDMI 2.0 and down-mixes Dolby Digital, Dolby Digital Plus, Dolby TrueHD, DTS, DTS-HD Master Audio or LPCM up to 7.1 channels to 2CH analog audio via RCA L/R jacks. In addition, the unit allows the HDMI source up to 4K resolution at 60Hz (4:4:4) to be looped out and extended to a local display.
Commercial and residential AV systems
Classroom...
-
Item# MUX-500786
2 Options AvailableThe MuxLab "Single Camera Live Streaming Solution" (model 500786) includes the main components needed to broadcast live content to mass recipients spread out across the globe. The solution allows live presentations to effectively be streamed over the Internet at 1080p/60, and can work with industry standard broadcast streaming services such as YouTube, Facebook, Wowza, to name a few, and also works with popular Audio/Video content production software tools such as OBS, Wirecast, and others.
The...
Read More
-
Item# MUX-500466
The HDMI to VGA Converter converts a single HDMI channel to analog VGA/RGB. The converter allows HDMI sources to be used with legacy VGA/RGB equipment thereby helping to maximize investment in existing VGA hardware. Features: Converts HDMI to VGA
Supports up to 1080p/1920x1200 Deep Color
Use HDMI sources with legacy VGA displays
No external power required
Supports DVI* when used with a DVI to HDMI cable
Specifications:
-
Item# MUX-500467
The Muxlab 500467 is an HDMI to USB 3.0 Video Capture & Streamer (500467) allows the user to record from HDMI video sources to a PC over USB 3.0. The unit supports an HDMI In port for the source and HDMI Loop Out for a monitor. The 500467 is capable of connecting to a 4K/60 source and will stream at up to 1080p/60 over the USB 3.0 port to a PC or similar device to record and/or send the video to a broadcasting service such as YouTube, Facebook, and other broadcasting services. The device...
-
Item# MUX-500436
The Muxlab 500436 HDMI to HDMI with Audio Extraction, 4K/60 allows one (1) HDMI source to be distributed to one (1) HDMI display. The device supports up to 4K (3840 x 2160) video resolution at 60Hz, 8-bit color and HD audio.
The unit extracts LPCM, Dolby Digital, DTS, Dolby Digital Plus* and Atmos** digital audio from the S/PDIF TosLink port and 2CH analog audio from the 3.5mm 2CH audio port. The product is HDCP 2.2 compliant and features LED...
-
Item# MUX-500422
The HDMI 1x8 Splitter allows one HDMI source to be distributed to up to eight HDMI displays. The splitter supports up to 1080p, 12-bit Deep color and HD audio. The splitter is HDCP 1.3 compliant and features LED diagnostics. Additionally, all HDMI connectors are on the rear panel for neater cabling.
Features: Distributes one HDMI source to eight displays
Supports up to 1080p @ 60Hz, Deep color 12-bit and 4K 3840x2160 @ 24, 25 & 30hz
Supports Dolby TrueHD and DTS-HD Master Audio
Connectors...
-
Item# MUX-500425
The HDMI 1x2 Splitter, 4K60 (500425) allows one (1) HDMI 2.0 source to be distributed to up to two (2) HDMI displays. The splitter supports up to 4K (3840 X 2160) video @ 60Hz, HDR, Deep Color and HD audio. The splitter is HDCP 1.4 & 2.2 compliant and features LED diagnostics. Additionally, all connectors are on the rear panel for neater cabling.
Features: Distribute one HDMI 2.0 source to two displays
Supports up to 4K @ 60Hz (4:4:4)
HDCP 1.4 and 2.2 compliant
Supports HDR and Deep Color
Supports...
-
Item# MUX-500426
The HDMI 1x4 Splitter, 4K60 (500426) allows one (1) HDMI 2.0 source to be distributed to up to four (4) HDMI displays. The splitter supports up to 4K (3840 X 2160) video @ 60Hz, HDR, Deep Color and HD audio. The splitter is HDCP 1.4 & 2.2 compliant and features LED diagnostics. Additionally, all connectors are on the rear panel for neater cabling. Features: Distribute one HDMI 2.0 source to four displays
Supports up to 4K @ 60Hz (4:4:4)
HDCP 1.4 and 2.2 compliant
Supports HDR and Deep Color
Supports...