-
Item# KR-ADC-GM-HF
Kramer ADC-GM/HF is a VGA to HDMI™ adapter cable. This active cable converts an analog VGA signal to a digital HDMI signal. A USB-A connector enables inputting audio to the HDMI output and powering the cable.
ADC-GM/HF is perfect for connecting a VGA-equipped desktop PC or laptop to an HDMI display or projector with a resolution of up to 1080p.
Features: VGA(M) to HDMI™(F) active adapter cable with USB audio/power port
Max resolution - 1080p
Specifications: VIDEO
Max...
-
Item# KR-CON-RJ45-3
The Kramer CON-RJ45-3 is a shielded RJ-45 connector designed to fit 24AWG to 23AWG twisted pair cables with an overall insulation diameter of 1.40mm to 1.50mm. All shielded twisted pair cables (STP) cables require a shielded connector. CON-RJ45-3 is sold in packs of 10.
Please Note: Use with recommended Kramer category cable like the KR-BCUNIKATLSHF3. (sold separately)
Features: Designed for 24AWG to 23AWG twisted pair cables
Overall cable insulation diameter - 1.40mm...
-
Item# KR-W-45-B
Kramer W-45(B) is an RJ-45 Ethernet wall plate insert with 1 Cat 6 Ethernet on a female RJ-45 connector input and 1 Cat 6 Ethernet on a female RJ-45 connector output.
Features: Front Panel Connections: 1 RJ-45 CAT6
Rear Panel Connections: 1 RJ-45 CAT6
Standards Compliance: Permanent Link/Channel of TIA/EIA-568-B.2 Cat.6, ISO/IEC 11801, Cenelec EN 50173, IEC 60603-7, PoEP in accordance with IEEE 802.3at
Size: Single slot wall plate insert
-
Item# KR-ADC-MDP-DF
The Kramer ADC-MDP/DF is a Mini DisplayPort Male to DVI-D Female adapter cable 6 inches in length. This adapter allows you to connect a Mac or PC with a Mini Displayport output to a DVI monitor. Compatible with the Thunderbolt port on Mac computers. Supports DVI Single Link computer video resolutions up to 1920 x 1200, and HD resolutions up to 1080p. Fully molded ends ensures a long cable life.
-
Item# KR-ADC-MDP-GF
The Kramer ADC-MDP/GF is a Mini DisplayPort Male to15-Pin HD Female adapter cable 6 inches in length that Connects Mac® or other computer with a Mini DisplayPort video output to a VGA monitor with up to WUXGA resolution (1920 x 1200 pixels)..
Features: Resolution Support - Up to 1080p
-
Item# KR-ADC-MDP-HF
The Kramer ADC-MDP-HF is a 6 inch (15cm) cable that connects Mac® or other computers with a Mini DisplayPort video output to an HDMI monitor with resolution support up to 1080p.
Specifications: Mini DisplayPort (M) to HDMI (F) Adapter Cable
Length - 6 inch (15cm)
-
Item# KR-ADC-MDP-M1
The Kramer ADC-MDP/M1 is a Mini DisplayPort (M) to DVI, HDMI or VGA (F) adapter cable 6 inches in length.
Please Note: This is not a DA. The ADC-MDP/M1 converts only one format at a time.
Features: Supports Mini DisplayPort 1.1a dual-mode input
HDMI port supports audio output for iMac (Late 2009) and MacBook Pro (Mid 2010)
Supports an HDMI/DVI/VGA output with a resolution of up to
[email protected], 225MHz/2.25Gbps per channel (6.75Gbps total)
12-bit per channel...
-
Item# KR-ADC-U31C-DPF
Kramer's ADC-U31C/DPF is a USB 3.1 Type-C to DisplayPort adapter cable that lets you output DisplayPort video and audio from a USB Type-C™ device to easily connect extra monitors to a laptop or desktop without having an extra graphic card. This short cable adapter is ideal for connecting your MacBook, Chromebook or laptop with USB Type-C to a DisplayPort monitor or projector supporting resolution up to
[email protected] Features: Max. Resolution
[email protected] (4:4:4)
Compatible with Windows...
-
Item# KR-ADC-DPM-HF-UH
Kramer's ADC-DPM/HF/UHD enables you to connect your DisplayPort™ equipped PC or laptop to an HDMI™ display.
This active DisplayPort to HDMI adapter is used for true conversion when the source does not support DP++ and can be used in either DisplayPort single-mode or dual-mode outputs.
ADC-DPM/HF/UHD supports up to
[email protected] (4:4:4) video resolution and HDCP 2.2.
Features: Supported Resolutions - Up to
[email protected] (4:4:4)
Plug and Play Installation - No driver is required
Active...
-
Item# KR-AD-AOCD-XL-TR
The Kramer AD-AOCD/XL/TR is a DVI adapter that can be used with Kramer pluggable AOCH/XL and AOCH/60 cables (CLS-AOCH/XL, CP-AOCH/XL, CLS-AOCH/60, CP-AOCH/60). Using this adapter you can change your AOCH/XL or AOCH/60 HDMI cable to a DVI-DVI, HDMI-DVI or DVI-HDMI cables.
Features: Fits AOCH/XL & AOCH/60 Cables. (sold separately)
AD-AOCD/XL/TR Adapter - Micro HDMI (female) to DVI-D single link DVI (male).
Supported Resolutions - AD-AOCD/XL/TR: up to 1080p and UXGA (1600X1200...
-
Item# KR-W-DVIB
The Kramer W-DVI is a DVI-I, Dual-Slot Wall Plate Insert.
Specifications: Front Panel Connections - DVI-I (F).
Rear Panel Connections - DVI-I cable (F).
Size - Dual slot wall plate insert.
-
Item# KR-AD-GM-GF-RA
The AD-GM/GF/RA is a 15-pin HD (M) to 15-pin HD (F) Right-Angled Adapter.
-
Item# KR-AD-AOCH-XL-TR
The Kramer AD-AOCH/XL/TR is an HDMI adapter set used with the Kramer pluggable AOCH/XL cables (CLS-AOCH/XL, CP-AOCH/XL)(Sold Separately). AD-AOCH/XL/TR can be a spare set of adapters in case of loss or damage to the original set included with the cable.
Features: AD-AOCH/XL/TR - Set of HDMI type-A plugs, Rx&Tx (ARC not supported).
Supported Resolutions - Up to
[email protected] (4:4:4).
Supports DDC, EDID & HDCP.
-
Item# KR-AD-RING-2
6 Version AvailableKramer's AD-RING is a stainless-steel ring of HDMI adapters that attaches to your display cable so you can plug different presentation sources into the HDMI cable*. Laptops, tablets, smart phones, digital cameras, and net books have a variety of connectors for displaying their content. AD-RING provides the presenter easy access to the appropriate adapter for connection to the HDMI infrastructure. This simple and effective solution supports mobile device content and keeps the adapters...
Read More
-
Item# KR-ADC-DF-HM
Kramer's ADC-DF/HM is a short cable, approx 1ft in length, designed to adapt a DVI cable to a device with an HDMI input, or to adapt from an HDMI source to a DVI cable.
Features: Quality Construction: Molded connectors, rugged jacket, and gold plated connectors are used for outstanding performance and long life.
Compatibility: HDMI and DVI are often adapted to one another since they share the same TMDS system for video transmission. Note that if the source is HDMI the audio signal willbe...
-
Item# KR-K-SPIDER
Kramer K-SPIDER is an active multi-format male input to HDMI male output adapter that enables you to connect one HDMI, DisplayPort, mini DisplayPort, or USB Type-C source to an HDMI accepter.
Features: Supports full
[email protected] digital video connectivity
Auxiliary power through USB connector
3 Meter Output Cable
Specifications: Inputs
HDMI: On a male HDMI connector over 6.5cm (2.5") pigtail
USB-C: On a male USB type-C port over 6.5cm (2.5") pigtail
DisplayPort: On...
-
Item# KR-CB-LBLUE
Kramer's CB-LBLUE colored Connector Boots for RJ-45 are plastic boots that complete the termination of Kramer's twisted pair cables. The colorful PVC boots provide additional strain relief to the connector, add a professional look to the cable termination and color-code the cables for easy organization.
They are available by individual color in quantities of 10.
-
Item# KR-TS-201US
Kramer TS-201US TBUS Power Socket Module - 110V AC USA
-
Item# KR-TS-PEU
Kramer's TS-PEU is a power extension unit that includes six universal power sockets: one on the surface of the unit and five hidden neatly under the table. TS-PEU fits into TBUS inner frame modules with dual power socket openings.
To use the hidden sockets, simply pull TS-PEU out of the TBUS using the handles and lay it on the table. When not in use, carefully slide TS-PEU back into the TBUS. Specifications: Ports: 6 power universal connectors
Power Source (AC power limits):...
-
Item# KR-TS-UC
Kramer TS-UC is a USB charging module with two USB-type A sockets. One socket supplies 1A for charging a smartphone and the other socket supplies 2.4A for charging a second smartphone or a tablet. Both sockets can be used simultaneously.
Specifications: Power
Source: 100-240V/50-60Hz
Consumption: 3.4A (socket 1 - 1A, socket 2 - 2.4A)
-
Item# KR-TS-W1US
The TS-W1US from Kramer is a dual insert power socket module that mounts to the inner frame of a UTBUS Under Table Mount or TBUS Table Box.
Features: Easy Installation - Modular, screws into the inner frame of Kramer TBUS boxes.
Power Handling - 100-120V AC, 50/60Hz, maximum 5A.
Specifications: Ports: 1 US power connector
Power: 100-120V AC, 50/60Hz, maximum 5A
Product Dimension: 4.60cm x 3.40cm x 7.20cm (1.81" x 1.34" x 2.83" ) W, D, H
Product Weight: 0.2kg (0.4lbs) approx
Shipping...
