-
Item# INDI-IP4PPS
The IndiPRO Tools 12V Power Supply with 4-Pin XLR Connection comes with a standard US AC power cord but can operate on any AC current from 100 to 240V. It converts the AC input to a 12VDC current at 6A. It features an attached 8 foot cord that is terminated with a 4-pin female XLR connector for a direct connection to the user’s equipment.
Features: Specifications:
-
Item# INDI-2PSKTDC
2 Mount AvailablePower your camera or accessories with these Micro-Series 98Wh Li-Ion Batteries and dual charger kit. This kit is comprised of a 2x 98Wh V-mount lithium-ion battery and a 16.8V DC dual-position charger for V-mount batteries. The battery runs on a premium lithium-ion cells and supports up to a 12A draw. It features a 5-LED power gauge that displays remaining battery power and a D-Tap port for simultaneously powering additional accessories as well as a built-in USB interface. The V-mount dual battery...
Read More
-
Item# INDI-98PPC
The IndiPRO Tools 98PPC 24" 2.5mm to Sony L-Series Type Dummy Battery Cable is designed to work with optional select IndiPRO Tools POWER POD systems to provide power to devices that accept Sony L-Series type batteries. The cable is 24" long and polarity tested with the optional POWER POD systems, so you don't have to worry about crossed polarity when powering devices.
Features: For Select IndiPRO Tools Power Pods
Accepts up to 19 VDC
24" Long
Polarity Tested
Specifications:...
-
Item# INDI-MINISNL
The IndiPRO Tools MINISNL 30" long regulated Tri-Tap to Sony L-Series Type Dummy Battery provides power to an optional camera or device. The cable is regulated to provide the correct voltage to your device, and in addition, the in-line voltage regulator helps prevent electrical noise from being introduced into your camera. There is also a USB port that outputs 5 volts of power at up to 2 amps, enabling it to power most USB devices on set, including smart phones and some tablets. Also a female...
-
Item# INDI-RK301
This 4-Way D-Tap Splitter Cable Converter lets you convert a single D-Tap output to four D-Tap outputs. The recommended load is 10A maximum with unregulated voltage. The converter features a D-Tap connector on one end of a cable, and an array of four D-Tap connectors on the other. Features: Specifications: Connector 1: 1x D-Tap, Male
Connector 2: 4x D-Tap, Female
Maximum Load: < 10 A (recommended)
Length: 28"
Weight: .2 lb
-
Item# INDI-PR2SA7
The 2.5mm DC Power Cable to regulated Sony A7s type dummy battery from Indipro tools is a 24' cable that terminateds in a 7.2v regulated Sony A7s type dummy. This Cable to be used with 12v to 17v power system. Features: Specifications:
-
Item# INDI-XLR4PT
The IndiPRO 32? P-Tap To 4-Pin XLR Female Cable from IndiPRO Tools has been assembled and pre-tested by IndiPRO to confirm the cable maintains industry standard polarity of pin 4 positive, pin one negative, when connected to an optional battery with a P-Tap connector. Features: Specifications:
-
Item# INDI-69SA7
The IndiPRO Tools 24? 2.5mm to Sony A7 Type Dummy Battery Cable is designed to work with optional select IndiPRO Tools POWER POD systems to provide power to devices that accept Sony A7 type batteries. The cable is 24? long and polarity tested with the optional POWER POD systems, so you don’t have to worry about crossed polarity when powering devices. This 24? long cable features a 2.5mm coaxial power connector to a Sony A7 dummy battery. Although you can use this cable to connect optional power...
-
Item# INDI-PRO4PN
Power up to two XLR-equipped devices right from a wall outlet with the Dual 4-Pin XLR AC Power Adapter from IndiPRO Tools. It features two Neutrik female 4-pin XLR outputs on one end and a 3-prong U.S. AC plug on the other, and outputs 12 VDC with up to 10A max.
Features: Two Neutrik Female 4-Pin XLR Outputs
3-Prong U.S. AC Plug
Outputs 12 VDC, 10A Max
100-240 VAC 50/60 Hz, 1.5A Input
Specifications: Electrical
AC Input Power: 100 to 240 VAC, 50 / 60 Hz at 1.5 A
Output Voltage: 12...
-
Item# INDI-PT12MAG
The Power Converter D-Tap to Blackmagic Mini Converter Plug allows you to power your Blackmagic Mini Converter using a 13 to 17 VDC battery that has a D-Tap power connector. It converts the 13 to 17 volts to regulated 12 VDC and is rated for a 2.5-amp draw at 12 volts, which provides a safety margin to the Blackmagic Mini Converter. Made in the USA. Features: Specifications: Input Voltage: 13 to 17 VDC
Output Voltage: 12 VDC
Max Current Draw: 2.5 A
Cable Length: 24"
Weight: .15 lb
-
Item# INDI-PTC4WS
The PTC4WS 4-Way D-Tap Splitter Cable Converter with a premium coiled cabled lets you convert a single D-Tap output to four D-Tap outputs. The recommended load is 10A maximum with unregulated voltage. The converter features a D-Tap connector on one end of a cable, and an array of four D-Tap connectors on the other. This cable features a premium coiled cable that runs 20" when contracted and 36" when fully extended. Features: Specifications: Maximum Load: 10 A
Cable Length: Coiled...
-
Item# INDI-PTSA7
The 30" Power Converter P-Tap to Sony A7 Type Dummy Battery from IndiPRO Tools allows you to power your camera using external batteries with a P-Tap power connector. The converter regulates any input voltage within the range of 12 to 18 VDC, providing 7.2 volt output. It features a P-Tap connector on one end and a dummy battery that fits into a Sony A7 battery compartment on the other end.
Features: Specifications:
-
Item# INDI-P411C
This IndiPRO Tools AC Power Supply with a Dummy Battery lets you conveniently power most cameras that use Canon LP-E6 batteries directly from a wall outlet, allowing for continuous power at an event or in the studio. The power cable runs 8 ft long so you'll have enough length to move around.
On one end this handy power supply features an LP-E6-type dummy battery, and the other end has a standard US power plug. At the same time it supports worldwide 100-240V power input (using optional plug adapters)....
-
Item# INDI-PRFPS
This PRFPS 12V Power Supply with 4- Female D-tap Output Connections. The unit comes with a standard US AC power cord but can operate on any AC current from 100 to 240V. It converts the AC input to a 12VDC current at max 10Amps. It features an attached 8' cord that is terminated with four, female Power tap connectors. Made in the USA.
Features: Four D-Tap Outputs
10A Max
3-Prong US AC Plug
100-240V Worldwide Power Input
-
Item# INDI-SLPLP
The Indipro Sony L type battery adapater plate allows you to power your camera or device that requires a Canon LP-E6 battery. By Inserting a Sony L type battery into the locking plate, the attached Canon LP-E6 dummy battery that’s connected, can power-up the camera or device for an extended period of time. There is a 1/4 20 insert for mounting on a camera or rig. It provides an output of 7.4V. The Indipro Sony L series battery adapter plate is designed to last through all aspects of production....
-
Item# INDI-SLPNP
The Indipro Sony L battery adpater plate allows you to power your camera or device that requires a Sony NP-FW50 battery. By inserting a Sony L type battery into the locking plate, the attached Sony NP-FW50 type Dummy battery that’s connected, can power-up the camera or device for an extended period of time. There is a 1/4 20 insert for mounting on camera or rig. It provides an output of 7.4V. This Sony L battery adapter plate is designed to last through all aspects of production. The cable is 24"...
-
Item# INDI-SLPUSB
The Indipro Sony L series battery adapter plate allows you to power your camera or device that requires a Mini USB. By inserting a Sony L type battery into the locking plate, the attached Mini USB cable can power-up the camera or device for extended period of time. There is a 1/4 20 insert for mounting on a camera or rig. It provides an output of 5V. To remove Sony L battery from plate, press Locking device and slowly slide battery out of plate. The INDIPRO Sony L Battery Plate adapter is designed...
-
Item# INDI-VMBP4K
Use the IndiPro Tools VMBP4K V-Mount Battery Plate with 15mm Rod Mount for BMPCC 4K/6K from IndiPRO Tools to power your Blackmagic Pocket Cinema Camera 4K or 6K with a longer-lasting V-mount battery. It connects to the camera using a dedicated 2-pin connector at the end of a 16" cable, and attaches to your camera rig via an integrated 15mm LWS rod bracket.
If positioned on the back of your rig, the plate and battery can function as a counterweight. This plate features one D-Tap output...
Our Price: $150.99
Availability: Direct Ship from manufacturer, contact us for availability
Add to Wish List-
Item# INDI-DTSFX9
The IndiPro DTSFX9 is a D-Tap Power Cable for Sony PXW-FX9 XDCAM 6K Full-Frame Camera (36", Regulated)
Features: Features A D-Tap Connector On One End And Regulated DC Barrel Connector On The Other
Specifications: Length: 36 Inch
-
Item# INDI-BMUVP
This V-Mount Battery Plate for Blackmagic Design URSA/URSA Mini allows you to attach third party V-Mount batteries to your URSA/URSA Mini camera. The V Lock connects directly to the back of the URSA, avoiding the need for extra cabling. Features: Specifications: Battery Plate Type: V-Mount
Connector: 1 x D-Tap
Compatibility: All URSA models
Dimensions: 5.6 x 3.6 x 0.9"
Weight: 0.4 lb
-
Item# INDI-15MMC
The IndiPRO Tools Dual 15mm Rod Clamp with 1/4"-20 for Power Pod mounts on an optional IndiPRO Tools Power Pod using the 1/4"-20 screw and allows you to mount your Power Pod onto 15mm LWS rods Features: Specifications:
-
Item# INDI-PDV4XLR
IndiPro Tools V-MOUNT PLATE TO 4-PIN NEUTRIK XLR allows you to connect V-mount batteries to power up devices that require Female 4 pin XLR power The Connector which extends out from the side on a 20" cable. The plate also features one P-Tap accessory ports providing 12V-16V of power (depending on your battery).
This plate is designed to be mounted on your rig using a included 15mm mounting adapter.
Specifications: Cable Length: Approx. 20"
Connector: 4-pin Neutrik XLR
Accessory Port: 1x P-Tap
Dimensions:...
Our Price: $150.99
Availability: Direct Ship from manufacturer, contact us for availability
Add to Wish List-
Item# INDI-PDVA7
This INDIPRO TOOLS V-Mount Plate allows you to connect V-mount batteries to your Sony A7, A7r, or A7s. It connects to the camera via a dummy battery, which extends out from the side on a 20" cable, and an integrated regulator ensures that the correct voltage is delivered to the camera. The plate also features one P-Tap accessory ports providing 12V-17V of power (depending on your battery). This plate is attached to a 15 mm mounting clamp for easy mounting on any 15mm rod systems.
Features: Dummy...
Our Price: $150.99
Availability: Direct Ship from manufacturer, contact us for availability
Add to Wish List-
Item# INDI-PDVBM4K
IndiPro Tools V-Mount plate to Blackmagic Design 4K Camera allows you to connect V-mount batteries to power up the Blackmagic Cinema Camera. It connects to the camera via plug, which extends out from the side on a 20" cable,. The plate also features one P-Tap accessory port providing 12V-16V of power (depending on your battery). This plate is designed to be mounted on your rig using a included 15mm mounting adapter.
Specifications: Cable Length: Approx. 20 inches
Connector: BMCC Connector (2.5...
Our Price: $150.99
Availability: Direct Ship from manufacturer, contact us for availability
Add to Wish List-
Item# INDI-PDVFX9
The V-Mount Battery Adapter Plate from IndiPRO Tools offers a lightweight battery solution with multiple outputs to simultaneously power your Sony PXW-FX9 cinema camera as well as a variety of accessories mounted on your camera rig.
The durable plate features two unregulated 14.8 VDC D-Tap outputs and a 19.5 VDC barrel output on the end of a 5" cable to power the camera. It mounts onto the back of the camera using its integrated aluminum top plate and the included captive screw set.
...
