-
Item# HRT-HBX
The HBX HDMI extender kit is comprised of a compact Sender (HBX-S) and corresponding Receiver (HBX-R). The kit is used to extend HDMI, RS-232, IR, and Ethernet (100BaseT) up to 100 meters (328 feet) using a single Cat6 cable. The extender supports all PC and HDTV Resolutions to 4K @ 30 Hz 4:4:4 or 4K @ 60 Hz 4:2:0.
The IR extension preserves the modulation (carrier) frequency and provides compatibility to most standards. The Sender and the Receiver each include a universal 5v...
-
Item# HRT-UHBX-WP-P2
Hall Technologies UHBX-WP-P2 is an extender kit ( combination of UHBX-S-WP + UHBX-R-PSE ) from Hall Research that utilizes HDBaseT technology. It can send HDMI and PoH (Power-over-HDBaseT) to 500 ft (150 m) on a single Cat6 cable. The extender uses only one +5v power supply, internally creates 48v PoH and complies with IEEE 802.3af handshake. The P2 extender's receiver unit provides power to the sender. In standard mode the UHBX-WP-P2 supports DVI and HDMI signals of virtually any resolution...
-
Item# HRT-UH-BTX
This HDBaseT (UH-BTX) extension kit comprised of a compact Sender (UH-BTX-S) and corresponding Receiver (UH-BTX-R). The UH-BT and UH-BTX are a family of HDBaseT™ compliant Senders and Receivers used to extend uncompressed HDMI video and RS-232 control signals up to 230 ft (-BT models) or 328 ft (-BTX models) over a single CAT5e/CAT6 UTP cable. The extenders are comprised of a Sender (-S) and a Receiver (-R) and extend all PC and HD resolutions without compression, up to 4K UHD. Full-duplex...
-
Item# HRT-FHD264-R
The FHD264-R is part of a family of HDMI over LAN Senders (encoders) and Receivers (decoders) utilizing advanced video encoding techniques in order to distribute up to 64 Full-HD video signals to hundreds of displays on a simple 1 Gigabit local area network (LAN). They also extend Serial RS-232 communications and bi-directional IR remote signals. HDMI Audio is extracted and available on a convenient 3.5mm stereo jack on both the Sender and the Receiver. The FHD264-S Sender also provides local...
-
Item# HRT-FHD264-S
The Hall Technologies FHD264-S is part of a family of HDMI over LAN Senders (encoders) and Receivers (decoders) utilizing advanced video encoding techniques in order to distribute up to 64 Full-HD video signals to hundreds of displays on a simple 1 Gigabit local area network (LAN). They also extend Serial RS-232 communications and IR remote signals. HDMI Audio is extracted and available on a convenient 3.5mm stereo jack on both the Sender and the Receiver. The FHD264-S sender also...
-
Item# HRT-HBX-R
The HBX-R is a Class A HDBaseT compliant Receiver that supports 100 meter Cat6 range and is used to extend HDMI, RS-232, IR, and Ethernet (100BaseT) up to 100 meters (328 feet) using a single Cat6 cable.
Since this product uses the HDBaseT standard, video is extended pixel-by-pixel with no compression or latency. The extender supports all PC and HDTV Resolutions including 4K @ 30 Hz 4:4:4 or 4K @ 60 Hz 4:2:0. The IR extension preserves the modulation (carrier) frequency thereby...
-
Item# HRT-HBX-S
The HBX-S is a Class A HDBaseT compliant Sender (Transmitter) that supports 100 meter Cat6 range and is used to extend HDMI, RS-232, IR, and Ethernet (100BaseT) up to 100 meters (328 feet) using a single Cat6 cable.
Since the product uses the HDBaseT standard, video is extended pixel-by-pixel with no compression or latency. The extender supports all PC and HDTV Resolutions including 4K @ 30 Hz 4:4:4 or 4K @ 60 Hz 4:2:0. The IR extension preserves the modulation (carrier) frequency...
-
Item# HRT-UH-BTX-R
The Hall Technologies UH-BT and UH-BTX are a family of HDBaseT™ compliant Senders and Receivers used to extend uncompressed HDMI video and RS-232 control signals up to 230 ft (-BT models) or 328 ft (-BTX models) over a single CAT5e/CAT6 UTP cable. The extenders are comprised of a Sender (-S) and a Receiver (-R) and extend all PC and HD resolutions without compression, up to 4K UHD.
Full-duplex RS-232 extension is provided via 3-pin terminal blocks, supporting all baud rates...
-
Item# HRT-HD-AUD-IO
The Hall Technologies HD-AUD-IO is an award winning HDMI audio extractor (de-embedder) and inserter (embedder).
The product provides one HDMI input with a corresponding HDMI output. The HDMI input audio signal simultaneously extracts to both 2-channel L/R analog and Digital SPDIF (TOSLINK).
The product provides two audio inputs (analog and digital). Users can select which audio to embed in the HDMI output. It can be the same as the original HDMI audio (pass-thru), SPDIF digital, or...
-
Item# HRT-SP-HD-4C
The Hall Research SP-HD-4C can distribute an HDMI audio/video source to up to 4 displays simultaneously without any loss. It is compliant to HDCP 2.2 and supports 4K UHD resolutions up to 4K @ 60Hz (4:4:4), HDR and 3D. This distribution amplifier also provides analog L/R and digital SPDIF (TOSLINK) outputs for connection to audio amplifiers, headphones, etc. The distribution amplifier is capable of scaling 4K signal down to 1080p independently for each output. This allows users to accept...
-
Item# HRT-SP-HD-8B
The Hall Technologies SP-HD-8A is a compact 8-channel HDMI Video Splitter that can produce 8 identical outputs of DVI or HDMI input source for display on 8 outputs. It supports Full-HD (1080p) as well as 4K (UHD) video formats.
Furthermore, the device extracts the audio from the HDMI input signal and outputs it as analog (L/R) stereo, and digital optical TOSLINK signals for connection to audio amplifiers, headphones, or other audio devices. If no output display is connected (or if both displays...
Our Price: $364.71
Availability: Direct Ship from manufacturer, contact us for availability
Add to Wish List-
Item# HRT-VSA-C-DP
Composite + Audio Input Decora Plate for VSA System. Sends composite video and stereo audio up to 1200 ft over a single Cat5 cable to a VSA System Receiver. Power is supplied by the system receiver.
Mud rings are provided for International orders. Features: Send Composite video and stereo audio up to 1200 ft over a single Cat5 cable
Power is supplied by system receiver
Single-gang Decora Plate for convenient mounting Specifications: Form Factor: Single-gang Decora
Max Distance: 1200 ft
Video Input:...
Our Price: $276.93
Availability: Direct Ship from manufacturer, contact us for availability
Add to Wish List-
Item# HRT-UHBX-R-WP
The UHBX-R-WP is a compact HDBaseT receiver in a wall plate. Perfectly suited for installations with shallow space between the wall and display, the receiver extends HDMI, IR and RS232 to 150m (500ft). The Receiver is powered via HDBaseT from the sender and no additional power supply is needed. RS232 and bi-directional IR ports are perfect for control. The unit is compatible with any compliant HDBaseT Transmitter (sender) with PoH sourcing function such as Hall Research UHBX-S-PSE (see section 3.1...
Our Price: $406.51
Availability: Direct Ship from manufacturer, contact us for availability
Add to Wish List-
Item# HRT-UHBX-SW3
The UHBX-SW3 is a kit comprised of a multi-input wall-plate sender and an HDBaseT receiver. The wall-plate accommodates 2 HDMI and 1 VGA inputs with audio. The HDMI #1input also supports MHL (Mobile High-Definition Link) with phone-charging feature to allow video presentation from a smart-phone using just a passive cable. The VGA input also accepts YPbPr Component video. The sender can manually or automatically switch between the various inputs and extends the video using HDBaseT standard. To control...
-
Item# HRT-UHBX-SW3-S
The UHBX-SW3-S is a multi-input Switcher/Sender with HDBaseT output. The device accommodates 2 HDMI and 1 VGA inputs with audio. The HDMI #1 input also supports MHL (Mobile High-Definition Link) with phone-charging feature to allow video presentation from a smart-phone using just a passive cable.
The VGA input also accepts YPbPr Component video. The sender can manually or automatically switch between the various inputs and extends the video using HDBaseT standard. To control the power on/off...
-
Item# HRT-UHBX-SW3-WP
The UHBX-SW3-WP is a multi-input Switcher/Sender with HDBaseT™ output. The wall-plate accommodates 2 HDMI and 1 VGA inputs with audio. The HDMI #1input also supports MHL (Mobile High-Definition Link) with phone-charging feature to allow video presentation from a smart-phone using just a passive cable.
The VGA input also accepts YPbPr Component video. The sender can manually or automatically switch between the various inputs and extends the video using HDBaseT™ standard....
-
Item# HRT-UHB-R
Hall Technologies UHB-R VGA & HDMI Auto-Switching Wall-Plate with HDBaseT Receiver is comprised of a 2-gang wall plate transmitter together with a low profile Receiver. The wall plate provides auto-switching VGA and HDMI inputs as well as a USB port for connection to a Host computer. The system uses HDBaseT 2.0 technology for superior data integrity and reliable operation. HDMI input supports 4K/60 4:4:4 HDR with upto 18G bandwidth. VGA and its associates Audio inputs are converted to HDMI...
-
Item# HRT-UHB-SW2
The Hall Technologies UHB-SW2 is a kit comprised of a 2-gang wall plate transmitter together with a low profile Receiver and associated power supply. The wall plate provides auto-switching VGA and HDMI inputs plus USB Host (PC). The system uses HDBaseT 2.0 for the most reliable operation possible. HDMI input supports 4K/60 HDR video and VGA and analog Audio input are converted to HDMI and scaled to be displayed on any TV or projector.
Auto switching will select and display the last connected...
-
Item# HRT-UHB-SW2-WP
The Hall Technologies UHB-SW2-WP is a 2-gang wall plate transmitter. The wall plate provides auto-switching VGA and HDMI inputs plus USB Host (PC). The system uses HDBaseT 2.0 for the most reliable operation possible. HDMI input supports 4K/60 HDR video and VGA and analog Audio input are converted to HDMI and scaled to be displayed on any TV or projector.
Auto switching will select and display the last connected input (HDMI or VGA), however a button is provided to easily override and select...
-
Item# HRT-UHBX-P1
UHBX-P1 is an extender kit from Hall Research that utilizes HDBaseT technology. It can send HDMI, IR, bi-directional RS-232, and PoH (Power-over-HDBaseT) to 500 ft (150 m) on a single Cat6 cable. The extender uses only one +5v power supply, internally creates 48v PoH and complies with IEEE 802.3af handshake.
The P1 extender's sender unit provides power to the receiver. In standard mode the UHBX-P1 supports DVI and HDMI signals of virtually any resolution up to 4K x 2K to 330 ft (100m), and in...
Our Price: $782.71
Availability: Direct Ship from manufacturer, contact us for availability
Add to Wish List-
Item# HRT-UH-BT
This Hall Technologies UH-BT is a HDBaseT extension kit comprised of a compact Sender (UH-BT-S) and corresponding Receiver (UH-BT-R).
The UH-BT and UH-BTX are a family of HDBaseT™ compliant Senders and Receivers used to extend uncompressed HDMI video and RS-232 control signals up to 230 ft (-BT models) or 328 ft (-BTX models) over a single CAT5e/CAT6 UTP cable.
The extenders are comprised of a Sender (-S) and a Receiver (-R) and extend all PC and HD resolutions without compression,...
-
Item# HRT-UH-BT-R
The Hall Technologies UH-BT and UH-BTX (UH-BT-R)are a family of HDBaseT™ compliant Senders and Receivers used to extend uncompressed HDMI video and RS-232 control signals up to 230 ft (-BT models) or 328 ft (-BTX models) over a single CAT5e/CAT6 UTP cable.
The extenders are comprised of a Sender (-S) and a Receiver (-R) and extend all PC and HD resolutions without compression, up to 4K UHD.
Full-duplex RS-232 extension is provided via 3-pin terminal blocks, supporting all baud...
-
Item# HRT-UH-BT-S
The Hall Technologies UH-BT and UH-BTX (UH-BT-S)are a family of HDBaseT™ compliant Senders and Receivers used to extend uncompressed HDMI video and RS-232 control signals up to 230 ft (-BT models) or 328 ft (-BTX models) over a single CAT5e/CAT6 UTP cable.
The extenders are comprised of a Sender (-S) and a Receiver (-R) and extend all PC and HD resolutions without compression, up to 4K UHD.
Full-duplex RS-232 extension is provided via 3-pin terminal blocks, supporting all baud...
-
Item# HRT-UH-BTX-S
The Hall Technologies UH-BT and UH-BTX are a family of HDBaseT™ compliant Senders and Receivers used to extend uncompressed HDMI video and RS-232 control signals up to 230 ft (-BT models) or 328 ft (-BTX models) over a single CAT5e/CAT6 UTP cable. The extenders are comprised of a Sender (-S) and a Receiver (-R) and extend all PC and HD resolutions without compression, up to 4K UHD.
Full-duplex RS-232 extension is provided via 3-pin terminal blocks, supporting all baud rates...
-
Item# HRT-UH18-KIT
The UH18 extends HDMI Video, USB, IR, and RS-232 on a single CAT6 cable to over 100 meters. It is perfect for allowing access to a PC from a remote user location and can be used to place the PC in a secure location away from the user station. The Sender provides local HDMI loop output as well as a USB hub so users can access the PC locally as well as from a remote station.
This Hall Research UH18-KIT extender kit consists of a Sender (UH18-S) and Receiver (UH18-R). Power, USB, RS-232...
