-
Item# FLK-LIQ-KIT
The Fluke LIQ-KIT LinkIQ™ Cable+Network Tester is the solution to verify cable performance up to 10G and solve network connectivity problems.
LinkIQ™ validates cable performance using frequency-based measurements to calculate maximum bandwidth (10BASE-T to 10GBASE-T), which ensure that tested links meet performance requirements.
LinkIQ™ also provides nearest switch diagnostics including advertised data rate, switch name and port number and VLAN information, plus PoE...
Our Price: $2,495.00
Availability: Extended Lead Time. Email, Chat or Call Us for more details.
Add to Wish List-
Item# FLUKE-233
The Fluke 233 remote display digital multimeter allows you to be 30 ft away from the measurement point with the innovative wireless display. With the 233, you can perform two man jobs alone and remove the hazard from the job. Features: True-rms ac voltage and current for accurate measurements on non-linear signals
Measure up to 1000 V ac and dc
Measure up to 10 A (20 A for 30 seconds)
10,000 µF capacitance range
Frequency to 50 kHz
Built in thermometer conveniently allows...
Our Price: $369.99
Availability: Direct Ship from manufacturer, contact us for availability
Add to Wish List-
Item# FLK-325
The Fluke 325 40/400A AC/DC, 600V AC/DC True-RMS Clamp Meter with Frequency, Temperature, & Capacitance Measurements are designed to perform in the toughest environments and provide noise-free, reliable results users can trust to confidently diagnose problems. True-rms measurements and optimized ergonomics make the Fluke 325 Series Clamp Meters the best general troubleshooting tools for commercial and residential electricians.
Much like the other Fluke 320 Series Clamp meters, the Fluke 325 Clamp...
Our Price: $334.99
Availability: Direct Ship from manufacturer, contact us for availability
Add to Wish List-
Item# FLK-323
The Fluke 323 True-RMS AC Clamp Meter, 400A AC, 600V AC/DC is designed to verify the presence of load current, AC voltage and continuity of circuits, switches, fuses and contacts. True-RMS measurements and optimized ergonomics make the 323 a perfect general troubleshooting tool for commercial and residential electricians. This small and rugged clamp meter is ideally suited for current measurements up to 400A, in tight cable compartments.
Features: 400A AC current measurement
600V AC and...
-
Item# FLK-115
The Fluke 115 is the solution for a wide variety of electrical and electronic testing applications. This true-rms meter provides easy one-handed operation in a compact package. Features: Resistance, continuity, frequency, capacitance, and diode test
Measures 20 A (30 seconds momentary; 10 A continuous)
Large white LED backlight to work in poorly lit areas
Compact ergonomic design for one-handed operation
Compatible with optional magnetic hanger (ToolPakª)
True-rms for accurate measurements...
-
Item# FLUKE-373
The Fluke 373 Clamp Meter offers improved performance perfect for many ac only current measurement situations. With true-RMS ac voltage and current measurements, the Fluke 373 reads up to 600 A ac and 600 V ac or dc.
Features: 600 A ac current measurement with fixed jaw
600 V ac and dc voltage measurement
True-rms ac voltage and current for accurate measurements on non-linear signals
Resistance measurement to 6000O with continuity detection
1000 æF capacitance measurement
State of the art...
Our Price: $264.99
Availability: Direct Ship from manufacturer, contact us for availability
Add to Wish List-
Item# FLK-117
Electrician's Multimeter with Non-Contact Voltage Features: VoltAlert Technology for integrated non-contact voltage detection
AutoVolt feature for automatic AC/DC voltage selection
LoZ: low input impedance prevents false readings due to "ghost voltage" Large display and white LED back light to work in poorly lit areas more effectively
True-RMS for accurate measurements on non-linear loads
Min/Max/Average to record signal fluctuations
Compatible with optional magnetic hanger(ToolPak)...
Our Price: $234.99
Availability: Direct Ship from manufacturer, contact us for availability
Add to Wish List-
Item# FLK-T51000
The Fluke T5 Electrical Testers let you check voltage, continuity and current with one compact tool. With the T5, all you have to do is select volts, ohms, or current and the tester does the rest. OpenJaw current lets you check current up to 100A - without breaking the circuit. Its tough test leads stow neatly in the back of the tester, making it easy to tote the T5 in your tool pouch. Detachable SlimReach test probes are customized for national electrical standards. The test leads accept optional...
Our Price: $169.99
Availability: Direct Ship from manufacturer, contact us for availability
Add to Wish List-
Item# FLK-26000900
The Pro3000 Analog Tone and Probe are your best choice for toning and tracing wire on non-active networks, and specifically for identifying individual pairs with SmartTone technology.
Angled bed-of-nails clips allow easy access to individual wires, and the RJ11 connector is ideal for use on telephone jacks. The large loud speaker on the probe allows you to hear through drywall, wood or other enclosures to find wires quickly and easily. You can send this loud tone up to 10 miles on most cables!
Use...
-
Item# FLK-MT-8200-49A
The MicroMapper MT-8200-49A is a hand-held cable tester that makes it easy to verify the integrity of Ethernet twisted pair cables. Test for opens, shorts, reversed, crossed, and split pairs and scan for any existing faults in your cable. Trace cables hidden in ceilings, walls, floors, and bundles.
Features: Cable tester verifies wiremaps and identifies faults with LEDs
MicroMapper MT-8200-49A, remote, and patch cable
Remote unit enables 1-person testing of installed cables
Two tones...
-
Item# FLK-MT-8200-63A
Fluke MT-8200-63A Probe detects IntelliTone™ digital signals on active networks and 500 to 1,200 Hz analog signals on inactive networks to locate, trace, and isolate copper cabling.
IntelliTone digital technology with advanced signal processing provides high-resolution measurement Auto-Off feature: The toner turns off automatically after 2.5 hours of inactivity. Probe turns off after 1 hour of inactivity SmartTone analog technology: IntelliTone Pro Toners generate four different...
-
Item# MT-8200-60-KIT
The Fluke MT-8200-60-KIT IntelliTone Pro 200 LAN toner and Pro 200 probe let you locate, isolate, and validate twisted pair (UTP, Cat 5e, Cat 6), coax cables (RG6, RG59, and others for CATV/CCTV), bare wire (such as speaker wire and security network wire), and Cat 3 telephone cabling. The toner also lets you validate data services.
The toner and probe feature both digital and analog toning and detection. The digital IntelliTone tone is primarily used on data cables, and on active networks....
-
Item# FLK-FTK1475
Dirty fiber optic endfaces are the major cause of problems in singlemode and multimode fiber optic systems. The Fluke Networks FTK1475 FI-500 FiberInspector Micro with SimpliFiber Pro Multimode & Singlemode PMLS, VisiFault, 2 FindFibers, Cleaning kit (NFC-KIT-BOX) and 1.25 mm swabs removes the hassle associated with inspecting fiber end faces, especially in low light and high cable density situations. It is very simple to use: Simply plug the cable into the FI-500 and touch the AF button. Within...
-
Item# FLK-TL80A
Test leads are an integral part of the complete measurement system and extend the capabilities of your digital multi-meter. The Fluke TL80A Basic Electronic Test Lead Kit has the fundamental accessories for testing electronics. Includes the Fluke TL71 premium test lead set which has one pair of red and black comfort grip probes with flexible silicone-insulated, right-angle test leads. With distinctive comfort grip probes, they are heat and cold resistant with safety ratings up to CAT III...
-
Item# FLK-MS2-100
The MicroScanner 2 Cable Verifier presents a revolutionary change in voice, data, and video cable testing. It starts by taking results from what was four different test modes and displaying them all at once - graphical wiremap, pair lengths, distance to fault, cable ID, and far end device. What's more, its integrated RJ11, RJ45, and coax test ports support virtually any type of low-voltage cable testing with no need for awkward adapters. The end result is reduced test time and technician error....
Availability: Direct Ship from manufacturer, contact us for availability
Item Details-
Item# FLUKE-88-5
The Fluke 88-5 operates very similar to the classic Fluke 88, but with more problem solving power, safety, convenience and impact protection.
Our Price: $499.99
Availability: Direct Ship from manufacturer, contact us for availability
Add to Wish List-
Item# FLK-287
The Fluke 287 True-RMS Electronics Logging Digital Multimeter Combo Kit with TrendCapture and FlukeView Software maximizes productivity for today's professionals involved in the research and development, maintenance, manufacturing and design of electronic circuits or systems. With a built-in data logger and TrendCapture technology - an on-screen graphical display - the 287 helps you track down elusive, intermittent problems or monitor equipment. FlukeView Forms software enables you to document,...
Our Price: $579.99
Availability: Direct Ship from manufacturer, contact us for availability
Add to Wish List-
Item# FLK-287-FVF
Maximize productivity with the combined Fluke 287 and FlukeView forms combo kit. Designed for today's professionals involved in the R & D, maintenance, manufacture and design of electronic circuits or systems. With built-in data logger and TrendCapture capability, the 287 helps you track down elusive, intermittent problems or monitor equipment with any of its functions.
FlukeView Forms enabling you to document store and analyze individual readings or series of measurements, overlay logged data...
Our Price: $774.99
Availability: Direct Ship from manufacturer, contact us for availability
Add to Wish List-
Item# FLK-289-FVF
Maximize productivity with the combined Fluke 289 and FlukeView forms combo kit. With built-in data logger and TrendCapture capability, the 289 helps you track down elusive, intermittent problems, monitoring equipment with any of its functions while you do other jobs. Overlay your logged data from six meters or six time periods to find cause and effect relationships or for condition monitoring applications in FVF software. Turn your data into meaningful graphs and tables for a professional report....
Our Price: $829.99
Availability: Direct Ship from manufacturer, contact us for availability
Add to Wish List-
Item# FLK-62MAX
The Fluke 62 MAX Infrared thermometer delivers many of the features of the Fluke 62 MAX+, but features a single laser and 10:1 distance to spot ratio. You can use the Fluke 62 MAX to perform non-contact temperature measurements on transformers, motors, pumps, panels, breakers, compressors, duct, steam lines, valves, and vents. It is small in size and extremely easy to use. The single laser helps you pinpoint the target for more accurate readings and makes it easier to measure temperatures...
-
Item# FLK-80BK-A
Fluke 80BKA TypeK Thermocouple Integrated Digital Multimeter Temperature Probe with standard shrouded banana jack is a convenient one piece construction. It is compatible with DMMs with temperature measurement functions and will measure a range of 40 to 260C. Features a one year warranty.
A digital multimeter (DMM) is a test tool used to measure two or more electrical values-principally voltage (volts), current (amps) and resistance (ohms). It is a standard diagnostic tool for technicians in...
Our Price: $52.99
Special Price: $41.95
Availability: More on the Way
Add to Wish List-
Item# FLK-80K-40
The 80K-40 is a high voltage probe designed to extend the voltage measuring capability of an AC/DC voltmeter to 40,000 volts peak AC or DC Overvoltage Category I. This means the probe can only be used to make measurements on energy limited circuits within equipment. Examples include high voltage within televisions or photo copy machines. DO NOT use this probe to measure high voltages on power distribution systems. The probe provides high accuracy when used with a voltmeter having 10 Megohm input...
Our Price: $279.99
Availability: Direct Ship from manufacturer, contact us for availability
Add to Wish List-
Item# FLK-87
The new Fluke 87V has improved measurement functions, troubleshooting features, resolution and accuracy to solve more problems on motor drives, in plant automation, power distribution, and electromechanical equipment. The 87V operates very similar to the classic 87, but with more problem-solving power, safety, convenience and impact protection Features: Unique function for accurate voltage and frequency measurements on adjustable speed motor drives and other electrically noisy equipment (87V)
Built-in...
Our Price: $449.99
Availability: Direct Ship from manufacturer, contact us for availability
Add to Wish List-
Item# FLK-107-ESP
The Fluke 107 is a compact, palm size easy-to-use digital multimeter made to fit the way you work. It is the perfect first-pass troubleshooting tool; small enough to fit in a shirt pocket yet tough enough to withstand daily use, including a 1-meter drop test. For everyday applications where true-rms accuracy isn't needed, the Fluke 107 delivers reliable measurements time after time. With a CAT III 600 V safety rating, you don't need to compromise safety. The Fluke 107 offers a comfortable...
-
Item# FLK-113
The New Fluke 113 True-rms utility multimeter designed for basic electrical tests, had the features needed to check and test for most electrical problems. This is simple-to-use and has significant improvements over its predecessor, the Fluke 7-600.
Designed for the utility user, this new meter has the features needed to repair most electrical problems encountered by utility workers and linemen everyday. With features such as Fluke's VCHEK, Added measurement functions, and conformance to the latest...
Our Price: $154.99
Availability: Direct Ship from manufacturer, contact us for availability
Add to Wish List
