-
Item# ETS-PV995
The ETS PV990 Series (PV995) SDI Splitter is a passive, versatile and easy-to-use video splitter designed for studios and on-location productions, as well as live performance venues. The HD-SDI Splitter can be used for monitoring ina wide variety of installations and locations.
The PV990 Series SDI Splitter supports all standard serial digital video data rates up to 3Gbps and is designed to split a SMPTE video signal into two full-quality broadcast video signals and send them to video...
-
Item# ETS-PV992
Energy Transformation Systems does it again. Featuring the ETS PV992 3G SDI 1X2 Splitter. This passive, versatile and easy-to-use video splitter is designed for studio use, on-location productions, as well as live performance venues. The SDI Splitter can be used for monitoring in a wide variety of installations and locations. The small, compact solution can be easily integrated into most sytems easily and discreetly.
The PV991 1x2 3G SDI Splitter supports all standard serial digital video data...
-
Item# ETS-PV991
The PV991 HD-SDI Splitter is designed to split a SMPTE 292M video signal into two full-quality broadcast video signals and send them over RG59 coax up to 450 feet. The two FBNCs can passively split the signal and send the HD-SDI video signal out the `out' FBNC to video monitors or other digital devices up to 75 feet.* (*based on Belden® cable). Features: Enables two outputs from a single source without interference or impedance mismatching
Passive device offers superior reliability and simplicity-no...
-
Item# ETS-SDS906
The ETS InstaMusician™ Panel SDS906 enables both audio and composite video signals to be sent over a single Cat5 or better cable instead of costly coax and microphone cables. The InstaMusician Panel (SDS906) is a 2-rack unit high panel
featuring (24) male XLRs for audio, (2) female BNCs for Video In and Video Out, (2) powerCon connectors on the back and (8) etherCon RJ45 jacks on the front.
ETS designed this panel for theater orchestras simultaneous listening and viewing;...
-
Item# ETS-SDS907
The ETS InstaSnake™ Panel SDS907 is a 2-
rack high panel which has (8) etherCon RJ45 jacks on the front
and (32) XLR connectors on the back. These panels allow you to
run audio signals over UTP cables (Cat5e or better data cables).
The InstaSnake Panel is a passive unit - you do not need
external power. These panels were designed to accept "mic"
level or line level analog or digital audio. It supports phantom
power when using shielded UTP cables.
Designed to the...
-
Item# ETS-SDS908
The ETS InstaSnake™ Panel SDS908 is a 2-
rack high panel which has (8) etherCon RJ45 jacks on the front
and (32) XLR connectors on the back. These panels allow you to
run audio signals over UTP cables (Cat5e or better data cables).
The InstaSnake Panel is a passive unit - you do not need
external power. These panels were designed to accept "mic"
level or line level analog or digital audio. It supports phantom
power when using shielded UTP cables.
Designed to the...
-
Item# ETS-SDS909
The ETS InstaMusician™ Panel SDS909 enables both audio and composite video signals to be sent over a single Cat5 or better cable instead of costly coax and microphone cables. The InstaMusician Panel (SDS909) is a 2-rack unit high panel
featuring (24) female XLRs for audio, (2) female BNCs for Video In and Video Out, (2) powerCon connectors on the back and (8) etherCon RJ45 jacks on the front.
ETS designed this panel for theater orchestras simultaneous listening and viewing;...
-
Item# ETS-SDS901
The ETS InstaSnake™ Series (SDS900 Series) is a compact,
lightweight, versatile passive group of components allowing you to
run audio signals over a single run of CAT5, 5E or 6 cables. With a
roll of wire, these compact units are easily transported and/or stored
solving dozens of live and/or recording sound problems.
The InstaSnake™ is a passive unit, so you do not need power. The InstaSnake™ accepts `mic 'level, line level, analog or digital audio and supports phantom power...
-
Item# ETS-SDS902
The ETS InstaSnake™ Series (SDS900 Series) is a compact,
lightweight, versatile passive group of components allowing you to
run audio signals over a single run of CAT5, 5E or 6 cables. With a
roll of wire, these compact units are easily transported and/or stored
solving dozens of live and/or recording sound problems.
The InstaSnake™ is a passive unit, so you do not need power. The InstaSnake™ accepts `mic 'level, line level, analog or digital audio and supports phantom power...
-
Item# ETS-EIP75MBNC45
As prices for IP cameras continue to drop and the quality continues to rise, there is an increase in the number of IP camera installations in many types of facilities which already have installed coax. ETS now has a way to utilize the existing coax cable by installing a pair of low cost ETS IP Camera Baluns (EIP-XX Series).a technology unique to ETS.
Using installed coax with ETS IP Camera Baluns can be used as a permanent installation solution or as a stop-gap measure until later upgrades are...
-
Item# ETS-AV827
The ETS AV-827 is the only HDTV Over CAT5 Balun on the market that handles digital audio, mono analog audio and stereo analog audio (two Cat5 cables required for stereo analog).
The ETS AV827 is a High Definition Component Video + Digital Audio + Analog Stereo Audio + IR or Data Pass Through. It is designed for ease of use and consistent signal labeling in applications that utilize component video signals. Component video formats include RGB, YUV, YIQ and YCbCr.
YCbCr component...
Our Price: $183.07
Availability: Direct Ship from manufacturer, contact us for availability
Add to Wish List-
Item# ETS-AV828
The ETS AV828 is a High Definition Component Video + Digital Audio + Analog Stereo Audio + IR or Data Pass Through balun. This balun is designed for ease of use and consistent signal labeling in applications that utilize component video signals.
Component video formats include RGB, YUV, YIQ and YPbPr. Custom labeling is available for use with your application as required (YPbPr shown above). Due to custom labeling requirements, additional lead times may apply for these baluns.
YPbPr...
Our Price: $193.07
Availability: Direct Ship from manufacturer, contact us for availability
Add to Wish List-
Item# ETS-AV900
5 Versions AvailableBaseband video is the analog signal you get from the "Video Out" connector on a VHS, Camera or other equipment. Usually it's an RCA-style connector, or a BNC on professional-grade devices. The single video plus stereo audio products (AV900 & AV901) are among our most popular products, sending signals over UTP CAT5 or CAT6 cable. There are multi-channel panel devices available here, as well.
Two units required to create a complete system.
Read More
-
Item# ETS-AV900WPIY
5 Options and 2 Colors AvailableThe ETS AV900WP, AV901WP and AV906WP have been redesigned with new flat circuit boards providing Baseband Video/Stereo Wall Plates which are utilized for point-to-point replacement of coaxial (video) and shielded (high impedance audio) cables with UTP wiring, Category 5 or better.
The AV901WP (with 3 RCA jacks for all inputs) is designed for installations that have a need for separate audio channels. For example, some VCRs and Video Cameras have video plus stereo outputs available on three RCA...
Read More
-
Item# ETS-PV821
2 Versions AvailableThe ETS PV820 Series of High Definition Component Video Baluns are designed for ease of use and consistent signal labeling in applications that utilize component video signals.
YCrCb component video is a recent addition to consumer equipment found on some DVD players, high-end televisions and home theater equipment. Professional uses include cameras and VTRs based upon any of the above standards.
High Definition Component Video PV820/PV821 for high-end home and professional theaters will transmit...
Read More
Our Price: $119.87
Availability: Direct Ship from manufacturer, contact us for availability
Add to Wish List-
Item# ETS-PV890
2 Versions AvailableThe ETS PV890 Series of RGB Video Baluns provides you with the ability to send RGB video over standard telecom wiring (UTP), of Category 3 or better quality. The PV890 supports RGB with SOG (sync on green), using 3 pairs of UTP. The PV891 allows RGB with separate sync to be run using 4 pairs. Both baluns support monitors with resolutions up to 1024 x 768 pixels, at refresh rates of up to 75 Hz. The RGB Baluns allow the user or installer to take advantage of pre-installed telecom wiring, or to realize...
Read More
-
Item# ETS-PV921
The ETS PV920 Series of Component Video Baluns are designed for ease of use and consistent signal labeling in applications that utilize component video signals.Component video formats include RGB, YUV, YIQ and YCbCr. The PV920 baluns are functionally identical to the PV890 series, but may be custom labeled for use with your application as required (YCbCr shown above). YCbCr component video is common on consumer equipment such as cable set top boxes and DVD players, high-end televisions and home...
-
Item# ETS-PV907
The ETS PV907 S-Video adapts Category 5 or better premise wiring for use with Super-VHS, Hi-8 and other "Y/C" format, high quality video signals.
The PV907 uses the industry standard 4 pin mini-DIN connector. This arrangement complements the connector on most high-end consumer and Y/C format professional video devices.
The PV907 is a passive (non-powered) device. It is bi-directional, in the sense that identical baluns are used on transmit and receive ends of the run of UTP. Used in pairs...
-
Item# ETS-PV950
Features ground loop eliminating circuitry of a proprietary isolating transformer yields a top of the line balun perfect for use in situations where differing ground potentials wreak havoc with standard video signals. Isolated Video Balun, FBNC to RJ45, pins 5 & 4.
-
Item# ETS-PV951
Ideal for situations where differing ground potentials between send and receive units create ground loop conditions, degrading picture quality.
Use UTP for long distance signal transmission with superior performance and easy, low cost installation Specifications: Distances
Color > 330 meters
B/W > 750 meters
Greater stability with wider bandwidth (0 to 60 Mhz)
Rugged plastic cases
Made in USA
100% tested
-
Item# ETS-PV849
2 Versions AvailableThe ETS PV840 Extended Baseband Video Baluns grant you the freedom to use UTP instead of costly coax to transmit baseband video signals throughout your facility, with better signal characteristics, and at a lower cost. Depending upon the application, it may be possible to utilize previously installed wiring with a corresponding dramatic reduction in the costs of installation.
The PV840 Series of baluns supports color video at distances in excess of 330 meters depending upon cable type. Black...
Read More
-
Item# ETS-PV850
Run SMPTE 259M serial digital video signals over CAT5e or better UTP. Female BNC to RJ45,pins 4 & 5.
-
Item# ETS-PV861B
The ETS PV860 Series of NTSC Baseband Video Baluns are the original video balun for use in adapting baseband video to run over UTP. In comparison to our PV840 baluns, the PV860 offers potentially greater run lengths, depending on cable quality, due to careful impedance matching. Conversely, the frequency range of the PV860 is lower - the PV840 offers extended high-end frequency response for better synchronization. Features: Run video over UTP for an easy, low cost installation
Impedance matching...
-
Item# ETS-PV885
Baseband Video and Stereo Audio Over CAT-5 Balan. Ultra model usable up to Channel 120 at 55 meters. Female 'F' connecotr to RJ45 Jack, pins 4 & 5.
-
Item# ETS-PV843
2 Versions AvailableComposite Video is also often called Baseband video (including both NTSC-US and PAL-Europe protocols). This is the type of signal found as output on professional grade video equipment. ETS has several single and multi-channel small-form-factor baluns which permit sending these signals over UTP cable. In addition, we have NTSC-specific and electrically isolated baluns for customers with special requirements. Baseband video panels incorporating all the features of our PV840 Series video baluns in...
Read More
