-
Item# CSW-NANO-V98K4
2 Mounts AvailableThe NANO-V98K4 X4 charger and Nano Micro kit is all-in-one compact power kit if you're looking for a micro style option.
The X4 charger is a compact charger with an upright design and a lightweight, plastic housing. It offers a simultaneous 2.6A charging as well a single bay per side fast charge. When only needing to charge one battery pack on each side, the rapid charge will charge the pack at 3A (one 98wh pack in under 2.5hrs). When two packs are placed on either side, the charge will...
Read More
-
Item# CSW-NANO-G98
The Micro Nano is quite possibly the smallest style pack on the market today. Measuring in at less than 4" in height and 2" in depth, while weighing a feathery 1.2 lbs., the NANO-G98 is the perfect "grab and go" pack for the majority of powering applications. Capable of handling up to a 10A load, consider these packs for lighter camera powering applications, on-board monitors, recorders, wirless tx/rx, etc.
The 14.8v, 98wh capacity allows for the packs to be transported carry-on without...
-
Item# SWT-FLEET-Q4A
The Core SWX Fleet Q charger is a four position, simultaneous charger ideal for rental, ENG, and cinema, providing the fastest charge times in the industry. The Fleet charger has four independent charge bays, allowing each bay to focus on the individual battery connected, completing a recharge on four 98wh battery packs in 2.5 hours. The charger's low profile design takes up as little space as possible, while allowing for stacking. A recessed carry handle coupled with the slim, light-weight aluminum...
Our Price: $807.00
Availability: Direct Ship from manufacturer, contact us for availability
Add to Wish List
-
Item# CSW-GP-TA-SFF
The GP-TA-SFF is a short form factor Hotswap Shark-fin adapter that mounts directly to the existing 3-stud mount plate on the camera. It allows for continuous battery operation, and for additional accessories, it has 2 powertaps. Since the batteries aren't stacked on one another, you can easily remove the depleted battery while leaving the other battery connected so that there is no down time. Specifications: Input: DC 11-17v
Output for Camera: DC 11-17v, Unregulated Paralleled
Output...
-
Item# CSW-CXV-C3MK
The Core SWX CXV-C3MK v-mount plate is specifically designed for select Canon EOS Cine cameras that accept DC 4-pin XLR input including the Canon C300 Mark III and Canon C500 Mark II. It directly mounts to the accessory bay on the rear of the camera, allowing use of 14.4V V-mount batteries while also leaving the camera's battery bay available for a BP-A style pack for hotswapping capabilities. To power additional accessories, it's equipped with two powertaps and one USB.
Specifications:...
-
Item# CSW-CORE-SUMOV
Cored CORE-SUMOV is a Double V-mount kit with coiled powertap to 12" XLR 4-pin for the Atomos Sumo. Features: 2 x V-Mount Plates
4-Pin XLR Connections Specifications: Input: DC 11-17v
Output for Monitor: DC 11-17v, Unregulated 4-Pin XLR Female
Output for P-tap: DC 11-17v, Unregulated
Size: 3.25 inch x 5.5 inch x 0.5 inch
Weight: 0.4 lbs.
Our Price: $151.00
Availability: Direct Ship from manufacturer, contact us for availability
Add to Wish List
-
Item# CSW-NANO-V98
The Micro Nano is quite possibly the smallest style pack on the market today. Measuring in at less than 4" in height and 2" in depth, while weighing a feathery 1.2 lbs., the NANO-V98 is the perfect "grab and go" pack for the majority of powering applications. Capable of handling up to a 10A load, consider these packs for lighter camera powering applications, on-board monitors, recorders, wirless tx/rx, etc.
The 14.8v, 98wh capacity allows for the packs to be transported carry-on without...
Our Price: $261.00
Availability: Extended Lead Time. Email, Chat or Call Us for more details.
Add to Wish List
-
Item# CSW-CUBE-200
The Core CUBE-200 is a lightweight, all aluminum 200w industrial power supply capable of powering the most power hungry cameras. The "Cube" is so compact, it fits in the palm of your hand, perfect for "Run and Gun" productions. Two XLR outputs provide up to 200w combined. The power supply has internal protections to protect the device against accidental misuse, shutting down and the resetting to operational status. AC input accepts 100-240VAC, making it useable worldwide. Includes...
-
Item# SWT-XPAJA5
This new cable allows users to plug into any battery via V-mount or Gold Mount Plate and power both 12vdc accessories (ie. Monitor, light) as well as an AJA mini converter. Specifications: Input: DC 11-17v
Output for Mini Converter: DC 5v, 3A
Output for P-Tap: DC 11-17v, Unregulated
Green LED Indication: Power input
Red LED Indication: AJA power output
Length:73"
Compatible with the AJA mini converter units accepting 5V with 2-Pin connector
Our Price: $152.00
Availability: Direct Ship from manufacturer, contact us for availability
Add to Wish List
-
Item# CSW-PB70C15
The latest single position powertap charger, PB70C15, charges any of our battery packs (exlcuding Hypercore Prime) through the powertap port on the battery while providing a quicker charge current at 1.5A, which is 50% faster than the original PB70C. The PB70C15 also accepts worldwide charger adapter modules (sold separately), so you can interchange based on your location. The charger has LED indication on the front which changes from red to green when fully charged. Features:...
-
Item# SWIT-DV-GP3-CIG6
The Core SWX DV-GP3-CIG6 allows you to power your GoPro Hero 3/3+ camera via a cigarette lighter whether in a vehicle or otherwise. The cable will convert the available 12v power to the proper operable voltage for the GoPro camera. While other options may be available, the Core SWX DV-GP3 adapter locks into the battery receptacle on the back of the camera, so you no longer need to rely on the USB connection on the side of the camera which can come out easily. Providing a reliable and secure power...
-
Item# SWIT-DV-GP3-PT3
The Core SWX DV-GP3-PT3 allows you to power your GoPro Hero 3/3+ camera via a powertap connector, a standard in the professional video industry. The cable will convert the available 8-24vdc power to the proper operable voltage for the GoPro camera. While other options may be available, the Core SWX DV-GP3 adapter locks into the battery receptacle on the back of the camera, so you no longer need to rely on the USB connection on the side of the camera which can come out easily. Providing a reliable...
-
Item# SWIT-DV-GP3-PT6
The Core SWX DV-GP3-PT6 allows you to power your GoPro Hero 3/3+ camera via a powertap connector, a standard in the professional video industry. The cable will convert the available 8-24vdc power to the proper operable voltage for the GoPro camera. While other options may be available, the Core SWX DV-GP3 adapter locks into the battery receptacle on the back of the camera, so you no longer need to rely on the USB connection on the side of the camera which can come out easily. Providing a reliable...
-
Item# SWIT-DV-GP3-USB
The Core SWX DV-GP3-USB is a power extension cable allowing you to power the GoPRO Hero 3/3+ and includes a USB AC Wall Adapter. While a USB cable is suitable for many applications, the Core SWX DV-GP3 adapter locks into the battery receptacle on the back of the camera, so you no longer need to rely on the USB connection on the side of the camera which can come out easily. Providing a reliable and secure power connection is essential when using the camera, since the GoPro's are often put in precarious,...
-
Item# SWIT-DV-GP3-USBP
The Core SWX DV-GP3-USB is a power extension cable allowing you to power the GoPRO Hero 3/3+ and includes a USB AC Wall Adapter. While a USB cable is suitable for many applications, the Core SWX DV-GP3 adapter locks into the battery receptacle on the back of the camera, so you no longer need to rely on the USB connection on the side of the camera which can come out easily. Providing a reliable and secure power connection is essential when using the camera, since the GoPro's are often put in precarious,...
-
Item# SWIT-DV-GP3-XT60
The Core SWX DV-GP3-XT60 allows you to power your GoPro Hero 3/3+ camera via an available XT60 connector from your Quad, Hex or Octocopter(i.e DJI Phantom battery pack with XT60 connector). The cable will convert the available power(3S-6S battery pack) to the proper operable voltage for the GoPro camera. The Y adapter cable allows you to tap off the copter power, and power both the copter as well as GoPro from the same power source. Features: Specifications:
-
Item# SWT-GP-DV-C
An interchangeable regulator block for the Powerbase-70 to be used with Canon BP style camcorders. 12 cable. Features: Specifications: Input: DC 11-17v
Output for Camera: DC 7.9v, 3A
Output for P-Tap: DC 11-17v, unregulated
Green LED Indication: Camera power output
-
Item# SWT-GP-DV-C24
An interchangeable regulator block for the Powerbase-70 to be used with Canon BP style camcorders. 24 cable. Features: Specifications: Input: DC 11-17v
Output for Camera: DC 7.9v, 3A
Output for P-Tap: DC 11-17v, unregulated
Green LED Indication: Camera power output
Our Price: $116.00
Availability: Direct Ship from manufacturer, contact us for availability
Add to Wish List
-
Item# SWT-GP-DV-CH
An interchangeable regulator block for the Powerbase-70 to be used with Canon 5D, 7D, and 60D cameras. 12 cable. Features: Specifications: Input: DC 11-17v
Output for Camera: DC 7.9v, 3A
Output for P-Tap: DC 11-17v, unregulated
Green LED Indication: Camera power output
-
Item# SWT-GP-DV-CH24
An interchangeable regulator block for the Powerbase-70 to be used with Canon 5D, 7D, and 60D cameras. 24 cable. Features: Specifications: Input: DC 11-17v
Output for Camera: DC 7.9v, 3A
Output for P-Tap: DC 11-17v, unregulated
Green LED Indication: Camera power output
Our Price: $116.00
Availability: Direct Ship from manufacturer, contact us for availability
Add to Wish List
-
Item# SWT-GP-DV-P
An interchangeable regulator block for the Powerbase-70 to be used with the Panasonic DV, HPX and HVX camcorders. 12 cable. Features: Specifications: Input: DC 11-17v
Output for Camera: DC 7.9v, 3A
Output for P-Tap: DC 11-17v, unregulated
Green LED Indication: Camera power output
-
Item# SWT-GP-DV-P24
An interchangeable regulator block for the Powerbase-70 to be used with the Panasonic DV, HPX and HVX camcorders. 24 cable. Features: Specifications: Input: DC 11-17v
Output for Camera: DC 7.9v, 3A
Output for P-Tap: DC 11-17v, unregulated
Green LED Indication: Camera power output
Our Price: $116.00
Availability: Direct Ship from manufacturer, contact us for availability
Add to Wish List
-
Item# SWT-GP-DV-S
An interchangeable regulator block for the Powerbase-70 to be used with Sony L-Series camcorders. 12 cable. Features: Specifications: Input: DC 11-17v
Output for Camera: DC 7.9v, 3A
Output for P-Tap: DC 11-17v, unregulated
Green LED Indication: Camera power output
-
Item# SWT-GP-DV-S24
An interchangeable regulator block for the Powerbase-70 to be used with Sony L-Series camcorders. 24 cable. Features: Specifications: Input: DC 11-17v
Output for Camera: DC 7.9v, 3A
Output for P-Tap: DC 11-17v, unregulated
Green LED Indication: Camera power output
Our Price: $116.00
Availability: Direct Ship from manufacturer, contact us for availability
Add to Wish List
-
Item# SWT-GP-DV-T2I
An interchangeable regulator block for the Powerbase-70 to be used with Canon T2i, T3i, and T3 cameras. 12 cable. Features: Specifications: Input: DC 11-17v
Output for Camera: DC 7.9v, 3A
Output for P-Tap: DC 11-17v, unregulated
Green LED Indication: Camera power output