-
Item# BURST-PXFS
The Pixie-FS is a Frame Store/TBC unit that is the size of a deck of cards. The Pixie-FS is a full feature 8-bit frame store including proc amp control. Adjustments for gain, color and timing. The Pixie-FS is dual standard, operating in either NTSC or PAL. Features: Full Frame TBC
Adaptive Comb Filter Decoding
Input Anti-aliasing Filters
Multi-standard NTSC/PAL
Genlock
Y/C
CVS Transcoding
Instant Recall of Factory Preset Levels
RS-232 Status and Control
Composite or S-Video (?)
Genlock...
Our Price: $750.75
Availability: Extended Lead Time. Email, Chat or Call Us for more details.
Add to Wish List
-
Item# SG-2B/N
The SG-2 Black Burst Generator is a single output unit. The output, which contains composite sync, color burst and 7.5 IRE setup (0 IRE in PAL) is a standard 1 Volt Video signal. The SG-2 is used to drive Genlock inputs, laydown "black" on tape, or feed a DA to distribute house black.
Second Generation: A redesign of one of our best sellers. Now the waveform is digitally generated under microprocessor control, providing precise purity. Specifications: Output: 1 volt standard video NTSC (PAL)
Output...
Our Price: $204.75
Availability: Direct Ship from manufacturer, contact us for availability
Add to Wish List
-
Item# SG-3/N
Outputs Composite Color Bars or Black
Includes Black and 100% White
Stable Sync Genlock source
Allows Color and Hue (Phase) to be correctly set on monitors
Pluge Pulse (Black) for setting Monitor Brightness
Short Circuit Protected
Compact Size
Lays down reference "bars" on tape
Rugged aluminum and steel case
Power supply included
3.58MHz NTSC Standard with BNC connectors
One year warranty, made in USA.
Our Price: $658.15
Availability: Direct Ship from manufacturer, contact us for availability
Add to Wish List
-
Item# SG-7
2 Types AvailableThe SG-7 Color Bar/Black Burst Generator is a low cost generator that produces one output of SMPTE Color Bars and six outputs of Black Burst. The SG-7 is designed to provide genlock signals for a variety of video equipment such as source decks, edit controllers, mixers, SEGs, cameras, etc. With the addition of the SG-7 to your Edit System, all equipment is genlocked to one source. The SG-7 may be used to "lay down" bars on tape, or to correctly set the color and brightness of video monitors. The...
Read More
-
Item# BURST-BG2
4 Models AvailableIf you need to switch quickly and operate in both NTSC and PAL, Composite and Y/C (in the same generator) and have Full Field Color Bars (option) the BG Series is the answer. Rack mounts available plus tone (either balanced or unbalanced) add to the flexibility. The Burst BG-2 and BG-2CB are a new generation of Black Burst Generators. Each unit has two video outputs that are digitally generated by an internal microprocessor and a A/D converter. This allows precise waveform generation meeting the...
Read MoreOur Price: $227.50
Availability: Direct Ship from manufacturer, contact us for availability
Add to Wish List
-
Item# BURST-BG2-12V
The BG-2 (and BG-2CB) are a new generation of Black Burst Generators. The BG-2 has two video outputs that are digitally generated by an internal microprocessor and an A/D converter. This allows precise waveform generation meeting the requirements of the most demanding applications. Can be configured as either composite or Y/C or both (option).
The BG-2 is simple to use. Connect the unit to the included 5Vdc power supply and push the Power switch up. The green LED on the front of the unit lights...
Our Price: $269.99
Availability: Direct Ship from manufacturer, contact us for availability
Add to Wish List
-
Item# BURST-BG3
6 Models AvailableThe BG-3 (single output) and the BG-7 (single pattern output plus 6 black burst outputs) are video multi-pattern generators with the ability for the user to import a graphics file and overlay that image on the pattern output.
Applications include source ID in studio and mobile applications.
A 24-bit full color graphic is created with any paint program and loaded into the BG-3/7 via a front-panel USB 2.0 port. Once stored in the unit, the graphic image is overlaid on the pattern output. There...
Read MoreOur Price: $671.95
Availability: Direct Ship from manufacturer, contact us for availability
Add to Wish List
-
Item# BURST-BG4
2 Models AvailableThe BG-4 Black Burst Generator has four microprocessor controlled, digitally generated, stable black burst outputs suitable to drive Genlock inputs of the equipment in an edit suite. There is also a 1 kHz tone output, either balanced or unbalanced. The Model BG-4CB includes selectable black burst / full field color bars, plus NTSC/PAL operation.
Note: Please indicate your tone programming preference (balanced or unbalanced tone) in the Comments section during...
Read MoreOur Price: $315.95
Availability: Direct Ship from manufacturer, contact us for availability
Add to Wish List
-
Item# BURST-BG5
4 Models AvailableThe BG-5 (and BG-5CB) are a new generation of Black Burst Generators. The BG-5 has five video outputs that are digitally generated by an internal microprocessor and an A/D converter. This allows precise waveform generation meeting the requirements of the most demanding applications.
The BG-5CB includes the features and specification of the BG-5 plus Full Field Color Bars and user switchable NTSC/PAL dual standard. An internal Tone Option is available for $70.00 extra - add T to part number. The...
Read MoreOur Price: $313.95
Availability: Direct Ship from manufacturer, contact us for availability
Add to Wish List
-
Item# TC-3
2 Types AvailableThe TC-3 SMPTE Time Code Generator/Reader allows the standard Video SMPTE Time Code to be generated on and read from 8mm, 1/2", 3/4" or 1" tape. Features include ability to generate window dubs, drop frame and field 1 indicator, plus a jam sync mode. The high legibility characters have user adjustable position and size, allowing for flexibility in the video display. The TC-3 also has selectable auto backtime of 0:30, 1:00, 1:30 and 2:00 minutes. The longitudinal time code can be recorded on an audio...
Read MoreOur Price: $434.34
Availability: Direct Ship from manufacturer, contact us for availability
Add to Wish List
-
Item# C2YC
The C2YC converter accepts Composite video and splits the signal into the Luminance "Y" and the Chroma "C" components or S-VHS (S-Video). Send a Composite video signal to the Video Input connector (BNC) on the rear panel. The separated "Y" and "C" video signals are obtained from the "Y/C Output" connector on the rear panel. The "Y" and "C" output is 75 Ohms and utilizes a standard 4 pin S-Video din connection.
Specifications: Input/Output: 1 Volt Standard Video.
Input Connector: Composite Video,...
Our Price: $289.00
Availability: Extended Lead Time. Email, Chat or Call Us for more details.
Add to Wish List
-
Item# YC2C
Burst YC2C YC to Composite Video Converter
Features: The Y2C2 converter accepts a Y/C input and outputs a composite video 1 volt standard signal
The format of the input is of the S-VHS or Hi8 type
The Y2C2 is 12Vdc powered, wall module included
Options available: PAL
Our Price: $185.95
Availability: Direct Ship from manufacturer, contact us for availability
Add to Wish List
-
Item# DV-1
2 Converter Types AvailableThe Model DV-1 converts serial digital video into analog video. The output is selectable for composite or Y/C. Features: NTSC/PAL
NTSC Pedestal On or Off
10 bit internal
4:2:2 270 Mbit SMPTE 259M
Serial Digital input
Composite or Y/C output
Equalized for up to 1000 ft of cable
Internal Color Bars
Read MoreOur Price: $285.18
Availability: Direct Ship from manufacturer, contact us for availability
Add to Wish List
-
Item# VDA-2EQ
The two output VDA-2EQ is a compact unit featuring a looping input. Adjustment allows for up to 1000 feet of RG59 cable. Small enough to fit most anywhere but with no sacrifice in performance. There is an internal jumper to select 75 Ohm termination, no need for an external terminator.
Our Price: $250.25
Availability: Direct Ship from manufacturer, contact us for availability
Add to Wish List
-
Item# VDA-4
3 Types AvailableBurst Electronics manufactures a series of Video Distribution Amplifiers. These units use the latest in high speed, monolithic operational amplifier technology. This results in wide bandwidth, high gain stability, low differential gain and phase. Models are available that range from MicroDA that will fit most anywhere to a 4 output version for Y/C (S-VHS/Hi8) applications.
All units contain internal regulated bipolar power supplies and are powered by external 12Vdc, perfect for field applications....
Read MoreOur Price: $199.25
Availability: Direct Ship from manufacturer, contact us for availability
Add to Wish List
-
Item# VDA-4YC
The four output VDA-4YC is a compact unit featuring a looping input. A wide bandwidth of 33 MHz assures clean video, Small enough to fit most anywhere but with no sacrifice in performance. Gain is adjustable plus or minus 3 dB. There is an internal jumper to select 75 Ohm termination, no need for an external terminator. Enclosure that can be for either table top use or rack mounted using the optional RM-4. Specifications: Input: 1 volt standard video
Input Impedance: Hi-Z or 751/2, looping (jumper...
Our Price: $299.65
Availability: Direct Ship from manufacturer, contact us for availability
Add to Wish List
-
Item# BURST-HDSR
Burst Electronics manufactures a series of Video Distribution Amplifiers. The HDSR is an HD/SD SDI reclocking, 2-output distribution amplifier capable of driving SDI video with embedded AES audio down 300 feet of quality video cable (RG6/U). Designed with a rugged enclosure to be placed in-line with long cable runs or can be rack mounted. Outputs are unity gain and switch selectable between reclocked and non-reclocked. 5Vdc power supply is included and backed by Burst's standard 2-Year warranty....
Our Price: $658.12
Availability: Direct Ship from manufacturer, contact us for availability
Add to Wish List
-
Item# HDA4
Every home needs an electronics expert, someone who can decide if it makes sense to buy the latest equipments. If you are a gadget freak, our Electronics catalog is your dream destination. If you're still stuck at the basics, our elaborate product specifications shall handhold.
Specifications: Standards Supported: SMPTE 292M/259M (NTSC 480i; PAL 576i; 720p59.94; 1080i50/59.94; 1080p30)
Level: 800mv p-p
Impedance: 75 ohm terminating
Equalization: Automatic up to 100m @ 3.0GHz using Belden 1694
Input...
Our Price: $729.93
Availability: Direct Ship from manufacturer, contact us for availability
Add to Wish List
-
Item# AV4X1P
The AV4x1P is a passive 4 channel combination stereo audio and video switcher. The use of a high quality switch allows for clean switching of audio and video. The switching function is audio follow video (both audio and video are switched simultaneously). The audio connectors are phono (RCA) type; the video connectors are BNC.
Specifications: Dimensions: 5.6W x 1.5H x 7.3D (inches)
Our Price: $259.35
Availability: Direct Ship from manufacturer, contact us for availability
Add to Wish List
-
Item# AV8X1P
The AV8x1P is a passive 8 channel combination stereo audio and video switcher. The use of a high quality switch allows for clean switching of audio and video. The switching function is audio follow video (both audio and video are switched simultaneously). The audio connectors are phono (RCA) type; the video connectors are BNC. The AV8x1P is the 8-channel version of the AV4x1P.
Features: Specifications:
Our Price: $305.25
Availability: Direct Ship from manufacturer, contact us for availability
Add to Wish List
-
Item# VS-4X1
5 Types AvailableThe VS4x1 is a four input, one output vertical interval video switcher. A special feature of the VS4x1 is digital logic that inhibits selection of an unused input, i.e. one where no video is present. The output is dc clamped to zero Volts. This allows for jump free switching between genlocked sources. The VS4x1 can be slaved with the AS4x1 audio switcher to allow audio follow video and breakaway switching. The VS4x1 is 12 Vdc powered, wall module included. Specifications: Input/Output: 1 Volt standard...
Read MoreOur Price: $339.00
Availability: Direct Ship from manufacturer, contact us for availability
Add to Wish List
-
Item# VSA
The Burst Electronics Model VSA detects the presence of composite video at its A input and outputs this video. If loss of video on the A input is detected, then the unit switches to the B input, lights a Red LED, and energizes an internal "tally" relay. This relay may be used to control external devices. The tally relay has both normally closed and normally open contacts (Form C relay). This Model includes stereo audio switching, audio follow video.
The video detection process utilizes a sophisticated...
Our Price: $268.45
Availability: Direct Ship from manufacturer, contact us for availability
Add to Wish List
-
Item# VDS
The VDS Video Present Detector will detect the loss of video on the A input and automatically switch to the B input. The detection is based on the amplitude of the sync tip and is adjustable from -5 IRE to -30 IRE. An LED tells when the A input has video present. There is also an auxiliary relay output that may be used to trigger external devices such as GPI inputs, trigger to a VCR, etc. Video detect on sync tip of A input - Detect Level is -5 to -30 IRE, adjustable - Delay on switch-over: 0.1...
Our Price: $222.95
Availability: Direct Ship from manufacturer, contact us for availability
Add to Wish List
-
Item# VDS-3
3 Types AvailableThe VDS Video Present Detector will detect the loss of video on the A input and automatically switch to the B input. The detection is based on the amplitude of the sync tip and is adjustable from -5 IRE to -30 IRE. An LED tells when the A input has video present. There is also an auxiliary relay output that may be used to trigger external devices such as GPI inputs, trigger to a VCR, etc. Video detect on sync tip of A input - Detect Level is -5 to -30 IRE, adjustable - Delay on switch-over: 0.1...
Read MoreOur Price: $382.20
Availability: Direct Ship from manufacturer, contact us for availability
Add to Wish List
-
Item# BURST-HDLG
The HDLG is a self-contained in-line HD/SD SDI logo generator with the form and function of the existing LG1Plus/LG4 family of logo generators. The HDLG provides storage for up to four 512Hx512V pixel 24-bit static logos.
The HD/SD SDI program video path is a full 10-bit resolution, while the resolution of the logo is 8-bit RGB (24-bit total) bitmap image. These logos can be switched on/off or faded in/out of the program path using Windows based software interface, a real-time clock scheduler,...
Our Price: $1,998.75
Availability: Direct Ship from manufacturer, contact us for availability
Add to Wish List